The level tube is a transparent sanitary hose installed on beer fermenters and brite tanks, widely used in craft breweries. It operates based on the communicating vessel principle. The top port of the level tube connects to the gas space of the tank, and the bottom port links to the liquid zone. The liquid level inside the level tube matches the beer level inside the tank all the time, so brewers can directly check the volume of beer by visual observation.

Many breweries install electronic level sensors on tanks, but electronic devices may suffer from signal drift, power failure and frequent calibration. The level tube works without electricity. It serves as a trustworthy manual reference, helping operators verify whether the data from electronic sensors is correct. It effectively prevents common production troubles such as overfilling, insufficient beer transfer and unexpected stop during canning or bottling.
For conical fermenters, the flexible level tube can be arranged along the outer cone wall. Apart from reading the liquid volume, brewers can observe the beer condition through the clear tube. In the early fermentation stage, brewers track the wort filling level. During active fermentation, they check turbidity and foam development. At the maturation stage, yeast sedimentation layers can be seen clearly. When harvesting yeast or transferring beer, the level tube helps operators catch the right time to discharge yeast, so excessive yeast will not be carried into the brite tank and ruin the clarity and flavor of final beer.

Inside brite tanks, finished bright beer is stored under COā pressure. The level tube connects to the headspace gas to balance pressure. This design avoids false level readings caused by tank back pressure. While transferring beer to filling machines, the level tube allows real-time monitoring of remaining beer volume, so the production team can arrange filling schedules properly and control the output of each batch.
Sanitary ball valves are equipped on both ends of the level tube. When cleaning, inspection or replacement is required, the valves can be closed to isolate the level tube from the tank. There is no need to release COā pressure or drain the beer inside the tank. It reduces beer loss greatly and avoids oxygen intake, which is critical to protect fresh beer flavor from oxidation.
Made of food-grade transparent material, the level tube is compatible with standard CIP cleaning cycles. Tri-clamp connections make disassembly and cleaning convenient. Compared with rigid glass sight tubes, the level tube removes the risk of breakage and injury. It is a practical, cost-effective standard accessory for small and mid-sized craft breweries and pilot brewing systems.
